Dell S3100 Command Line Reference Guide for the Series 9.82.0 - Page 516

detail flap-statistics routes received-routes [network [network-mask] (OPTIONAL) Enter the keyword detail to view neighborspecific internal information for the IPv4 Unicast address family. (OPTIONAL) Enter the keywords flap-statistics to view flap statistics on the neighbor's routes. (OPTIONAL) Enter the keyword routes to view only the neighbor's feasible routes. (OPTIONAL) Enter the keywords received-routes then either the network address (in dotted decimal format) or the network mask (in slash prefix format) to view all information received from neighbors. NOTE: Configure the neighbor softreconfiguration inbound command prior to viewing all the information received from the neighbors. denied-routes [network [network-mask] (OPTIONAL) Enter the keywords denied-routes then either the network address (in dotted decimal format) or the network mask (in slash prefix format) to view all information on routes denied via neighbor inbound filters. Command Modes • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.8(2.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.8.0 8.3.7.0 7.8.1.0 7.7.1.0 Description Introduced on the S3100 series. Introduced on the S4048-ON. Introduced on the S3048-ON. Added the ipv4 multicast and ipv6 unicast parameters. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Added the add-path option to the S4810. Output on the S4810 shows the ADDPATH parameters. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. 516 Border Gateway Protocol