Epson 680Pro Service Manual - Page 87
Paper Eject Roller removal, Removing the Front frame,
UPC - 010343832138
View all Epson 680Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
EPSON Stylus COLOR 680/777/777i 4.2.10 Paper Eject Roller removal 1. Remove the Housing from the printer. (Section 4.2.1 Housing removal) 2. Remove three screws (C.B.S 3x6 F/Zn) securing the Front frame to the Main frame. Revision B 4. .Remove the Plain washer and then remove the Combination gear 11.6, 36.8 carefully. Refer to Figure 4-xx. Combination gear 11.6, 36.8 Plain washer C.B.S 3x6 F/Zn screw Figure 4-38. Removing the Front frame 3. Lift up the right side of the Front frame and slide it to the left side a little bit and then remove it. C A U T IO N When removing the Front frame, if the CR unit is out of the CR home position, the nozzle surface of the Printhead may come in contact with Paper guide front as soon as the Front frame is removed. This is because the CR unit is held with this frame. Therefore, be sure to set the CR unit in the CR home position before removing the Front frame. Otherwise, the dot missing problem may occur. Figure 4-39. Disassembly and Assembly Disassembly 87