Epson FX-286 User Manual - Page 102
Switch 1, A-2. IBM Prop-inter mode self test, either, Table A-Z. DIP witch functions
View all Epson FX-286 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
takes over and the FX-286 starts printing out the Standard IBM Proprinter character set, as shown in Figure A-2. Figure A-2. IBM Prop-inter mode self test If you want to see the Alternate set, turn the power OFF. Then reset either switch 1-6, 1-7, or 1-8 from ON to OFF, and run the self test again. Remember, you must also reset DIP switches 2-1 and 2-3 as previ- ously mentioned if you want to select the IBM Proprinter mode for uses other than the self test. Tables A-1 and A-2 show you the functions of all the switches, and the rest of the appendix explains each of them. Table A-Z. DIP witch functions Switch 1 Switch 2 A-4
takes over and the FX-286 starts printing out the Standard IBM Pro-
printer character set, as shown in Figure A-2.
Figure A-2. IBM Prop-inter mode self test
If you want to see the Alternate set, turn the power OFF. Then reset
either
switch
1-6, 1-7,
or
1-8
from ON to OFF, and run the self test again.
Remember, you must also reset DIP switches
2-1
and
2-3
as previ-
ously mentioned if you want to select the IBM Proprinter mode for
uses other than the self test.
Tables
A-1
and
A-2
show
you the functions of all the switches, and
the rest of the appendix explains each of them.
Table A-Z. DIP witch functions
Switch 1
Switch 2
A-4