Epson FX-286 User Manual - Page 155
User-defined Characters, Format, Comments, Copy ROM Into RAM, Select User-defined Set
View all Epson FX-286 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
User-defined Characters Note: See Chapter 7 for sample programs and further information. The commands are available in the draft mode only. ESC & Define User-defined Characters Format: ASCII code: ESC Decimal: 27 Hexadecimal: 1 B & NUL (d1) (d2) ... (dn) 38 0 (d1) (d2) ... (dn) 26 00 (d1) (d2) ... (dn) Comments: This command allows characters to be redefined in the currently selected mode. l Epson only ESC : Format: ASCII code: ESC Decimal: 27 Hexadecimal : 1B Copy ROM Into RAM : 0 0 0 58 0 0 0 3A 00 00 00 Comments: This code allows the characters in the FX-286 ROM to be copied into RAM so that specific characters can be redefined. l Epson only. ESC % Select User-defined Set Format: ASCII code: ESC Decimal: 27 Hexadecimal: 1 B % (n) 37 (n) 25 (n) Comments: This code selects the user-defined set if n = 1 and the normal set if n = 0. ESC & is required to define the character set. l Epson only. G-27