Epson FX-286 User Manual - Page 195
Graphics, ESC B
View all Epson FX-286 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
ESC B Select Vertical Tabs Format: ASCII code: ESC Decimal: 27 Hexadecimal: 1 B B (n1) (n2) ... 0 66 (n1) (n2) ... 0 42 (n1) (n2) ... 0 0 Comments: Sets up to 64 vertical tabs in the current line spacing. Tab settings are not affected by subsequent changes in line spacing. Terminate this tab sequence with 0 or a number less than that of the last tab. Be sure that page length is set by ESC "C" command before using this. ESC R Format : ASCII code: ESC R Decimal: 27 82 Hexadecimal: 1 B 52 Return to Default Tabs Comments: Returns the horizontal and vertical tabs to their default settings. l IBM only. Graphics ESC K Select Single-density Graphics Mode Format: ASCII code: ESC Decimal: 27 Hexadecimal: 1 B K (n1) (n2) 75 (n1) (n2) 4B (n1) (n2) Comments: Turns on single-density graphics mode with 480 possible dots per eight-inch line and 816 per 13.6-inch line. If d is the total number of columns required, n1 = d MOD 256 n2 = INT(d / 256) This command must be followed by d data numbers. J-21