Epson FX-286 User Manual - Page 196
Select Low-speed Double-density Graphics Mode, Format, Comments, ESC L
View all Epson FX-286 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
ESC L Select Low-speed Double-density Graphics Mode Format: ASCII code: ESC Decimal : 27 Hexadecimal: 1 B L (n1) (n2) 76 (n1) (n2) 4C (n1) (n2) Comments: Turns on low-speed double-density graphics mode with 960 possi- ble dots per eight-inch line and 1632 per 13.6-inch line. If d is the total number of columns required, n1 = d MOD 256 n-12 = INT(d / 256) This command must be followed by d data numbers. ESC Y Select High-speed Double-density Graphics Mode Format: ASCII code: ESC Decimal: 27 Hexadecimal: 1 B Y (n1) (n2) 69 (n1) (n2) 59 (n1) (n2) Comments: Turns on high-speed double-density graphics mode with 960 possible dot positions per eight-inch line and 1632 per 13.6-inch line. Will not print consecutive dots in a row. If d is the total number of columns required, n1 = d MOD 256 n2 = INT(d / 256) This command must be followed by d data numbers. ESC Z Select Quadruple-density Graphics Mode Format: ASCII code: ESC Decimal : 27 Hexadecimal: 1 B Z (n1) (n2) 90 (n1) (n2) 5A (n1) (n2) Comments: Turns on quadruple-density graphics mode with 1920 possible dot positions per eight-inch line and 3264 per 13.6-inch line. Will not print consecutive dots in a row. If d is the total number of columns required, n1 = d MOD 256 n2 = INT(d / 256) This command must be followed by d data numbers. J-22