Epson FX-286 User Manual - Page 152
Graphics, Select Single-density Graphics Mode
View all Epson FX-286 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
Graphics Note: See Chapter 6 for sample graphics programs. ESC K Select Single-density Graphics Mode Format: ASCII code: ESC Decimal: 27 Hexadecimal: 1 B K (n1) (n2) 75 (n1) (n2) 4B (n1) (n2) Comments: Turns on single-density graphics mode with 480 possible dots per eight-inch line and 816 per 13.6-inch line. If d is the total number of columns required, n1 = d MOD 256 n2 = INT(d / 256) This command must be followed by d data numbers. ESC L Select Double-density Graphics Mode Format: ASCII code: ESC Decimal : 27 Hexadecimal: 1 B L (n1) (n2) 76 (n1) (n2) 4C (n1) (n2) Comments: Turns on low-speed double-density graphics mode with 960 possible dots per eight-inch line and 1632 per 13.6-inch line. If d is the total number of columns required, n1 = d MOD 256 n2 = INT(d / 256) This command must be followed by d data numbers. G-24