Fujitsu 6770 Operator's Guide - Page 134

Chapter 8 Troubleshooting Device Errors Device errors require recovery works by support engineers. They are listed as follows: ■Motor and Optical System Errors [E] and a number are displayed alternately. Indica tion Item E0 Flatbed motor malfunc- tion (Flatbed type only) E1 Flatbed optical system malfunction (Flatbed type only) Remedy 1 Confirm that the Transfer Lock is unlocked. 2 Turn the scanner off and on again. If the error is still displayed on the Function Number Display, record the indicated error code, and contact the store where you purchased the scanner or an authorized FUJITSU scanner service provider. Indica tion Item E2 Optical system error (Front-side scanning thru the ADF) E3 Optical system error (Back-side scanning thru the ADF). (fi-6670/fi-6670A/fi- 6770/fi-6770A) E6 Operator panel error E7 Internal memory error (EEPROM) E8 SCSI interface circuit error (fi-6670/fi-6670A/fi- 6770/fi-6770A) E9 Image memory error Remedy Turn off and on the scanner again. If the error is still displayed on the Function Number Display, record the indicated error code, and contact the store where you purchased the scanner or an authorized FUJITSU scanner service provider. ■ Overrun Errors [F] and a number are displayed alternately. Indica tion Item Remedy F2 Pick arm error Turn off and on the scanner again. If the alarm is still displayed on the F4 Background switching Function Number Display, record mechanism error the indicated error code, and F6 Fan error contact the store where you purchased the scanner or an F7 Heater error authorized FUJITSU scanner service provider. F8 F9 TOP Contents Index Introduction Scanner Overview Loading Documents How to Use ScandAll PRO Scan Parameters Various Documents Daily Care Consumables Troubleshooting Operational Settings Appendix Glossary 134