Fujitsu 6770 Operator's Guide - Page 82
Removing Punch Holes from A Scanned Image
UPC - 097564307478
View all Fujitsu 6770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Chapter 5 Various Documents You can select OFF(- -) or a value from 0.2% to 3.0% (in increments of 0.2%). *1: Ratio of black dots included in the scanned area (for white pages) • In Color/Grayscale mode Use the slider bar to specify a level from among five levels (1 to 5). The larger the number, the higher the accuracy. 6 Click the [OK] button. ⇒ You are returned to the [TWAIN Driver (32)] dialog box. 7 In the [TWAIN Driver (32)] dialog box, click the [OK] button. ⇒ Changes made are saved. 8 From ScandAll PRO, perform a scan. For how to perform a scan, refer to "Chapter 3 How to Use ScandAll PRO" (on page 51). Removing Punch Holes from A Scanned Image You can remove or obscure punch holes (black dots) from the output image of a scanned punched document. TOP Contents Index Introduction Scanner Overview Loading Documents Original Created image How to Use ScandAll PRO ʂ Punch hole marks are not removed when: • They are not aligned along with the document edge. • They vary in size or appear at various intervals. • The scanned document is not rectangular. • The scanned document is in dark-colored background. • Characters or figures exist at the edge of the document, or they overlap with the hole marks. • The document of a size larger than the specified page size is scanned with [Automatic Page Size Detection] enabled. • The size of the scanned document is not as specified in [Paper Size] while [Black Background] is selected. 1 Load a target document on the scanner. Fow how to load documents on the scanner, refer to "Chapter 2 Loading Documents" (on page 38). 2 Start up ScandAll PRO, and then open the [TWAIN Driver (32)] dialog box. For how to open the TWAIN Driver (32) dialog box, refer to "Chapter 3 How to Use ScandAll PRO" (on page 51). Scan Parameters Various Documents Daily Care Consumables Troubleshooting Operational Settings Appendix Glossary 82