Fujitsu 6770 Operator's Guide - Page 30

Chapter 1 Scanner Overview Indications on the Function Number Display Indication Explanation 8 Blinks only one time upon turning on the scanner. P Indicates that the scanner has been turned ON and is being initialized. 1 Indicates that initialization has ended successfully. This status is called "Ready Status" in which you can perform a scan. J Indicates that a recoverable error occurred during scan- U ning. "J" or "U" and an "error number" are displayed alternately. For error details, refer to "Temporary Errors" (on page 133). After the error has been resolved, you can return to the Ready Status (see "1" above) by pressing the [Stan/Stop] or [Send to] button. E Indicates that an abnormality (device error) occurred in the F scanner during its initialization or during scanning docu- C ments. H "E", "F", "C", "H", "A", or "L" and an "error number" are dis- A played alternately. L For details of the errors, refer to "Device Errors" (on page 134). If this error occurs, turn the Main Power Switch OFF and then ON again. If the error persists after this, contact the store where you purchased the scanner or an authorized FUJITSU scanner service provider. TOP Contents Index Introduction Scanner Overview Loading Documents How to Use ScandAll PRO Scan Parameters Various Documents Daily Care Consumables Troubleshooting Operational Settings Appendix Glossary 30