Fujitsu 6770 Operator's Guide - Page 160

Chapter 9 Operational Settings Selecting each item displays detailed settings (parameters) in the right part of the dialog box. Item Multifeed Page Edge Filler (ADF) Page Edge Filler (FB) Dropout color Explanation Selectable Parameters Default Select the method to detect multifeeds. Check either of overlapping or document length, or both. Can also be specified from the scanner driver's setting dialog box. Note the setting with the scanner driver is given a priority. None/Check Overlapping [Ultrasonic]/ Check Length/Check Overlapping and Length Selectable length (to be detected as length difference): 10, 15 or 20 mm Check Overlapping [Ultrasonic] Fill the specified width of the end sections on the scanned image with white or black color. When the backing (background) color is white, the end sections are filled with white; and when the background color is black, filled with black. Can also be specified from the scanner driver's setting dialog box. Note the setting with a larger value is given a priority. The setting here is not applied when Kofax VRS is used. ADF: Top/Left/Right: 0 to 15 mm Bottom: -7 to 7 mm (in increments of 1 mm) FB: Top/Bottom/Left/Right: 0 to 15 mm (A: Image area, B: Filled area, A+B: Output area) Top/Bottom/ Left/Right: 0 mm Drop out a preselected color for the scanned image (binary black & white/grayscale mode only). Can also be specified from the scanner driver's setting dialog box. Note the setting with the scanner driver is given a priority. Red/Green/Blue/White Green Connection via SCSI/USB Connector 1 Connection via SCSI/USB Connector 2 Yes: Configurable No: Not configurable Yes Yes Yes No Yes No TOP Contents Index Introduction Scanner Overview Loading Documents How to Use ScandAll PRO Scan Parameters Various Documents Daily Care Consumables Troubleshooting Operational Settings Appendix Glossary 160