Fujitsu 6770 Operator's Guide - Page 169
Settings Related to Scanning
UPC - 097564307478
View all Fujitsu 6770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
Chapter 9 Operational Settings 9.4 Settings Related to Scanning Adjusting the Starting Position for Scanning [Offset/Vertical Magnification Adjustment] When the position of the scanned image is not correct or the image looks elongated in a vertical direction, use the following procedure to adjust the offset and the scan scale for correction. ʂ The factory default settings are appropriate, so normally there is no need to make any adjustment. 1 Start up the Software Operation Panel. Refer to "9.1 Starting Up the Software Operation Panel" (on page 156). 2 From the tree listing on the left, select [Device Setting] and then click the [Offset] button. 3 Adjust the offset/scan scale as necessary. Offset Setting Unit Main Sub Description Select [ADF (front)] or [ADF (back)] (fi-6670/fi6670A/fi-6770/fi-6770A only), or [Flat Bed] (flatbed type only) as the target of offset adjustment. When the connection is via SCSI/USB Connector 2, the offset for scanning with the ADF is adjustable for the back-side pages only. Adjusts the horizontal (widthwise) offset. The setting range is from -2 mm to +3 mm in steps of 0.5 mm. Adjusts the vertical (lengthwise) offset. The setting range is from -2 mm to +3 mm in steps of 0.5 mm. TOP Contents Index Introduction Scanner Overview Loading Documents How to Use ScandAll PRO Scan Parameters Various Documents Daily Care Consumables Troubleshooting Operational Settings Appendix Glossary 169