Garmin GTN 750 Pilot's Guide - Page 115

5.5 Direct-To Map Waypoint Foreword A Direct-To course may be set to any waypoint selected on the Map page. The waypoint is selected by touching an item such as an airport, VOR, or NDB or Getting Started any other location. Touching the map page at any place not having an existing Audio & location name will create a waypoint with the name "MAPWPT." Touching the Xpdr Ctrl Direct-To key will automatically insert the selected waypoint as the Direct-To waypoint. The MAPWPT will be saved as a User Waypoint. Com/Nav 1. On the Map page, touch the map at the location intended to FPL be the Direct-To waypoint. Direct-To 2. Press the Direct-To key on the right side of the unit. Proc Waypoint Tab Direct-To Waypoint Name Direct-To Waypoint Map Symbol Charts Wpt Info Map Traffic Terrain Touch To Remove The Direct-To Course Touch To Activate The Direct-To Course Figure 5-9 Touch the Map to Create a MAPWPT as the Direct-To Course Destination Weather Nearest Music 3. Touch the Activate key or press the small right knob to Utilities activate the selection. System Messages Symbols Appendix 190-01007-03 Rev. B Garmin GTN 725/750 Pilot's Guide 5-7 Index