Garmin GTN 750 Pilot's Guide - Page 133
RNAV Approach Procedures
View all Garmin GTN 750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
NOTE: If you attempt to intercept the approach course at a distance less than 2.0 NM from the FAF, the GTN 7XX does not automatically switch the CDI to VLOC. In this case, touch the CDI key to manually switch from GPS to VLOC. Foreword Getting Started The automatic switch from GPS to VLOC is not immediate, but instead occurs Audio & Xpdr Ctrl gradually to prevent abrupt CDI changes when coupled to an autopilot. The CDI selection can also be changed manually by touching the CDI key. Com/Nav 6.11 RNAV Approach Procedures FPL The GTN 7XX allows for flying LNAV, LNAV/VNAV, LNAV + V, LP, and LPV approaches according to the published chart. Direct-To Phase of flight Annunciation L/VNAV LNAV LNAV + V LPV LP Description Lateral Navigation/Vertical Navigation. RNAV nonprecision approach with advisory vertical guidance. Lateral Navigation. RNAV non-precision approach. Lateral Navigation with Advisory Vertical Guidance. RNAV non-precision LNAV approach with advisory vertical guidance. The glidepath is typically denoted by a light dashed line on the vertical profile (Jeppeson only) with an associated glidepath angle (usually in the 3.00 degree range) and is provided to assist the pilot in maintaining a constant vertical glidepath, similar to an ILS glideslope. Localizer Performance with Vertical guidance (LPV) approach. RNAV precision approach. LP indicates Localizer Performance with no vertical guidance. Table 6-2 RNAV Approach Annunciations Minimums Published LNAV/ VNAV minimums. Published LNAV minimums. Published LNAV minimums. Published LPV minimums. Published LP minimums. Proc Charts Wpt Info Map Traffic Terrain Weather Nearest Music Utilities System Messages Symbols Appendix 190-01007-03 Rev. B Garmin GTN 725/750 Pilot's Guide 6-17 Index