Garmin GTN 750 Pilot's Guide - Page 313

15.1.4 Target Offset Foreword The Target Offset is a pilot-selected distance value that represents the geographical location where you wish to arrive at the target altitude. This Getting Started distance is measured from the Target Waypoint and, in a separate data field on the VCALC page, designated as either before or after the Target Waypoint. Audio & Xpdr Ctrl 1. While viewing the VCALC page, touch the Offset key. Com/Nav Selected Target Offset Backspace Key FPL Direct-To Numeric Proc Keypad Charts Wpt Info Map Traffic Figure 15-8 Select VCALC Target Offset Terrain 2. Use the numeric keypad to select the desired Target Offset and then touch the Enter key. Weather 15.1.5 Before/After Target Waypoint Nearest This setting designates whether the offset distance defines a point before you reach the target reference waypoint or after you reach the waypoint. The "After" Music selection is not available for the last waypoint in a flight plan. 1. While viewing the VCALC page, touch the Before/After Utilities key. System Messages 2. Touching the Before/After key will toggle between Before and After the Target Waypoint. Symbols Appendix 190-01007-03 Rev. B Garmin GTN 725/750 Pilot's Guide 15-7 Index