Garmin GTN 750 Pilot's Guide - Page 128

Foreword Getting Started Audio & Xpdr Ctrl Com/Nav 5. Touch the Transition key and then touch the key for the desired transition. Touch To Select Transition FPL Direct-To Proc Charts Wpt Info Map Traffic Terrain Weather Nearest Music Utilities Figure 6-15 Select Approach Transition 6. If desired, touch the Channel/ID key, then use the numeric keypad to select the channel number, and then touch the Enter key. The Channel and ID are typically loaded automatically if they are present. NOTE: As an alternate means of loading an approach, the Channel ID key allows you to select the channel ID for a SBAS approach for the current destination. The channel ID for the SBAS approach is available from an approved approach chart. If duplicate numbers are available for a channel, a list will be available where you may select the desired approach. 7. Touch the Load Approach key. The Active Flight Plan page will be displayed. The approach waypoints are placed at the end of the flight plan and the unit will automatically sequence to them after the en route waypoints. Destination Airport Approach Waypoints System Messages Symbols Appendix Index 6-12 Figure 6-16 After Loading an Approach Garmin GTN 725/750 Pilot's Guide 190-01007-03 Rev. B