Garmin GTN 750 Pilot's Guide - Page 311
Target Altitude, Altitude Type
View all Garmin GTN 750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 311 highlights
15.1.1 Target Altitude This sets the desired ending altitude for the VCALC setup. 1. While viewing the VCALC page, touch Target ALT. Selected Altitude Backspace Key Foreword Getting Started Audio & Xpdr Ctrl Com/Nav Numeric Keypad FPL Direct-To Proc Charts Wpt Info Figure 15-6 Select VCALC Target Altitude Map 2. Use the numeric keypad to select the desired Target Altitude and then touch the Enter key. Traffic 15.1.2 Altitude Type Terrain This value selects the altitude reference that will be used for VCALC calculations. Weather 1. While viewing the VCALC page, touch Altitude Type. Nearest 2. Touching the Altitude Type key will toggle between MSL and Above WPT. "Above WPT" is only available for waypoints that Music are airports. Utilities System Messages Symbols Appendix 190-01007-03 Rev. B Garmin GTN 725/750 Pilot's Guide 15-5 Index