Garmin GTN 750 Pilot's Guide - Page 355
Runway Surface, Minimum Runway Length, Enter
View all Garmin GTN 750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 355 highlights
1. While viewing the System Setup page, touch Runway Surface to display the options. Touch the desired surface type. Foreword Touch to Select Any Runway Surface Touch to Select Hard Runway Surfaces Only Touch to Select Hard or Soft Runway Surfaces Touch to Select Water Surfaces Only Getting Started Audio & Xpdr Ctrl Com/Nav FPL Direct-To Figure 16-17 Nearest Airport Runway Surface Type Proc 2. Touch Minimum Runway Length to display the keypad for selecting the minimum runway length. Select the desired Charts minimum runway length with the numeric keypad. A selection of "0" will allow any length. Wpt Info Touch Key to Map Delete Values Traffic Touch Keys to Set Values Terrain Weather Nearest Music Figure 16-18 Nearest Airport Runway Length Utilities 3. After selecting the runway length, touch the Enter key to save the entered values or touch the Back key to return to System the System Setup page without saving a value. Messages Symbols Appendix 190-01007-03 Rev. B Garmin GTN 725/750 Pilot's Guide 16-17 Index