Garmin GTN 750 Pilot's Guide - Page 318

Foreword Getting Started Audio & Xpdr Ctrl Com/Nav 4. Touch the Arrival Time key and select the local time of expected arrival at the selected waypoint. 5. When the Waypoint, Arrival Date, and Arrival Time values have been entered, touch the Compute RAIM key to determine if RAIM is available. FPL Direct-To Proc Touch To Compute RAIM RAIM Prediction Result Charts Wpt Info Map Figure 15-13 RAIM Prediction Completed Traffic 15.4 Trip Planning Terrain The GTN 7XX allows the pilot to view desired track (DTK), distance (DIS), estimated time en route (ETE), en route safe altitude (ESA) and estimated time of Weather arrival (ETA) information for a direct-to, point-to-point between two specified waypoints or for any programmed flight plan. This item also displays the sunrise/ Nearest sunset times for your destination waypoint (for the selected departure date). All times are based on the time set in System-Setup. The trip planning inputs are Music manually entered by the pilot. The trip statistics are calculated based on the selected starting and ending Utilities waypoints and the trip planning inputs. System In Flight Plan mode with a stored flight plan selected, and the entire flight plan (CUM) selected, the waypoints are the starting and ending waypoints of the Messages selected flight plan. In Flight Plan mode with a stored flight plan selected, and a specific leg Symbols selected, the waypoints are the endpoints of the selected leg. Appendix Index 15-12 Garmin GTN 725/750 Pilot's Guide 190-01007-03 Rev. B