Garmin GTN 750 Pilot's Guide - Page 357
CDI Scale Selection, ILS CDI Capture
View all Garmin GTN 750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 357 highlights
Foreword Touch OK to Enable Crossfill With Dual Units Getting Started Audio & Xpdr Ctrl Figure 16-19 Confirming Crossfill Selection Com/Nav 16.4.1.5 CDI Scale Selection FPL The CDI source and ILS CDI Capture type may be selected manually or automatically. The selected CDI Scale will be reflected in the annunciation bar at Direct-To the bottom of the display. Proc Touch To Select CDI Scale Charts Touch To Select ILS CDI Capture Type Figure 16-20 CDI Selection Wpt Info Map 1. While viewing the System Setup page, touch the CDI Scale key Traffic to allow automatic selection or to choose a CDI Scale manually. Terrain Touch To Select 1 NM CDI Scaling Weather Nearest Touch To Select Automatic CDI Scaling Music Utilities Figure 16-21 CDI Scale Selection System 2. Touch the ILS CDI Capture key to select automatic or manual. This feature enables the unit to automatically switch from GPS Messages to VLOC on an ILS approach. See Procedures-ILS Approaches for more detail on ILS approaches. Symbols Appendix 190-01007-03 Rev. B Garmin GTN 725/750 Pilot's Guide 16-19 Index