Garmin GTN 750 Pilot's Guide - Page 120

Foreword Getting Started Audio & Xpdr Ctrl Com/Nav FPL 6.2 Selecting a Departure A Departure Procedure (DP) is loaded at the departure airport in the flight plan. Only one departure can be loaded at a time in a flight plan. If a departure is loaded when another departure is already in the active flight plan, the new departure replaces the previous departure. The route is defined by selection of a departure, the transition waypoint, and a runway. NOTE: Vector-only departures are not available in the Procedures database as the GTN 7XX cannot provide navigational guidance on vectored legs. Direct-To 1. Touch the PROC key on the Home page and then touch the Departure key to display the Departure list. Proc 2. If necessary, touch the Airport key and enter the departure airport. Touch the key for the desired Departure. Charts Wpt Info Map Touch To Select Traffic Desired Departure Terrain Weather Nearest Music Figure 6-2 List for Selecting a Departure Utilities System Messages Symbols Appendix Index 6-4 Garmin GTN 725/750 Pilot's Guide 190-01007-03 Rev. B