HP 1240 HP Fax 1240 - (English) Getting Started Guide - Page 86
faxing from a DSL line, Obtain a DSL filter from your DSL provider.
UPC - 829160181998
View all HP 1240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
fax setup chapter 7 faxing from a DSL line If you have a digital subscriber line (DSL) service through your phone company, use the instructions in this section to connect a DSL filter between the telephone wall jack and your HP Fax. This filter removes the digital signal that would block your HP Fax from communicating properly with the telephone line. Caution! If you have a DSL line and you do not connect the DSL filter, you will not be able to send and receive faxes with your HP Fax. Use the phone cord supplied in the box with your HP Fax Telephone wall jack DSL filter supplied by your Back view of the Caution! If you do not use the supplied cord to connect from the DSL filter to your HP Fax, you may not be able to fax successfully. If you live in one of the countries listed in the table on page 77, you received a special 2-wire cord. This special 2-wire cord is different from the more common 4-wire phone cords you might already have in your office. For more information about how to tell the difference between the cords, see I have difficulties when sending faxes and when receiving faxes. on page 105. 1 Obtain a DSL filter from your DSL provider. 2 Using the phone cord supplied in the box with your HP Fax, connect one end to the open port on the DSL filter, then connect the other end to the port labeled "1-LINE" on the back of your HP Fax. 3 Connect the DSL filter cord to the telephone wall jack. 4 Proceed to how to tell if the following instructions apply to you on page 77 to determine what else you need to do to finish setting up your HP Fax. 76 hp fax 1240 series