HP 500X HP JetDirect Print Servers 600N/400N/500X/300X Administrator's Guide - - Page 117
HP JetDirect Configuration Messages 111, Table 7.1, Novell NetWare Configuration Messages 2 of 2
UPC - 088698574287
View all HP 500X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Table 7.1 Novell NetWare Configuration Messages (2 of 2) Message PORT X STATUS: Description READY: Print server is awaiting data. SERVER NAME: INITIALIZING: Print server is registering the node address or name/type. The name of the NetWare file server or print server. If no name is displayed, the JetDirect print server has not been configured. IPX/SPX RETRANS: NETWORK XXXXXX FRAME TYPE XXXXX RCVD XXXX If the message "UNABLE TO FIND FILE SERVER" appears in the "IPX/SPX STATUS:" section of the configuration page (see Table 7.5), the SERVER NAME field identifies the JetDirect discovery method [NSQ] (Nearest Service Query) or [GSQ] (General Service Query) and the name of the proxy file server used to locate the configured bindery servers. Number of retransmissions necessary because a remote node did not acknowledge receipt of a frame sent to it. Excessive retransmissions may degrade performance, cause 40 ERRORS, or indicate developing network hardware or congestion problems. The first column indicates the network number associated with the protocol frame type for communication between server and printer. Unless a specific frame type has been manually configured, the print server automatically determines the protocol frame type by listening to the NetWare data being transferred over the network. If UNKNOWN is listed, the HP JetDirect print server is still trying to determine which network number to use. If the network number is DISABLED, a specific frame type has been manually configured. The Frame Type value can be EN_8023, EN_8022, EN_II, or EN_SNAP. The RCVD count indicates how many packets have been received for each frame type. EN HP JetDirect Configuration Page Messages 111