HP 500X HP JetDirect Print Servers 600N/400N/500X/300X Administrator's Guide - - Page 60

Table 3.4, Print Server Parameters 2 of 2, JetDirect Internal, Print Server Menu, Description - print server manual

Get HP 500X - JetDirect Print Server PDF manuals and user guides
UPC - 088698574287
View all HP 500X manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

Table 3.4 Print Server Parameters (2 of 2) JetDirect Internal Print Server Menu Item CFG TCP/IP=NO* Description Selects whether you want to access the TCP/IP menu and set TCP/IP protocol parameters. In the TCP/IP menu, you can specify BOOTP=YES* for TCP/IP parameters to be automatically configured by a BootP or DHCP server when the printer is turned on. If you specify BOOTP=NO, you can manually set the following TCP/IP parameters from the control panel: s Each byte of the IP address (IP) s Subnet Mask (SM) s Syslog Server (LG) s Default Gateway (GW) s Idle Timeout period (default is 90 seconds, 0 disables the timeout) CFG ETALK=NO* Selects whether you want to access the EtherTalk menu and set the AppleTalk phase parameter (ETALK PHASE=1 or 2) for your network. 54 TCP/IP Configuration EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
54 TCP/IP Configuration
EN
CFG TCP/IP=NO*
Selects whether you want to access the TCP/IP
menu and set TCP/IP protocol parameters.
In the TCP/IP menu, you can specify
BOOTP=YES* for TCP/IP parameters to be
automatically configured by a BootP or DHCP
server when the printer is turned on.
If you specify BOOTP=NO, you can manually set
the following TCP/IP parameters from the control
panel:
■
Each byte of the IP address (IP)
■
Subnet Mask (SM)
■
Syslog Server (LG)
■
Default Gateway (GW)
■
Idle Timeout period (default is 90 seconds, 0
disables the timeout)
CFG ETALK=NO*
Selects whether you want to access the EtherTalk
menu and set the AppleTalk phase parameter
(ETALK PHASE=1 or 2) for your network.
Table 3.4
Print Server Parameters (2 of 2)
JetDirect Internal
Print Server Menu
Item
Description