HP 500X HP JetDirect Print Servers 600N/400N/500X/300X Administrator's Guide - - Page 36
Example of an HP JetDirect TFTP Configuration File, TCP/IP Configuration - jetdirect config
UPC - 088698574287
View all HP 500X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
# # Example of an HP JetDirect TFTP Configuration File # # Allow only Subnet 13.10.10 access to peripheral. # Up to four 'allow' entries can be written via TFTP. # Up to 10 'allow' entries can be written via SNMP. # 'allow' may include single IP addresses. # allow: 13.10.10.0 255.255.255.0 # # # Disable Telnet # telnet: 0 # # Enable the embedded web server # ews-config: 1 # # Detect SNMP unauthorized usage # authentication-trap: on # # Send Traps to 13.10.10.1 # trap-dest: 13.10.10.1 # # Specify the Set Community Name # set-community-name: 1homer2 # # End of file 30 TCP/IP Configuration EN
30 TCP/IP Configuration
EN
#
# Example of an HP JetDirect TFTP Configuration File
#
# Allow only Subnet 13.10.10 access to peripheral.
# Up to four ‘allow’ entries can be written via TFTP.
# Up to 10 ‘allow’ entries can be written via SNMP.
# ‘allow’ may include single IP addresses.
#
allow: 13.10.10.0
255.255.255.0
#
#
# Disable Telnet
#
telnet: 0
#
# Enable the embedded web server
#
ews-config: 1
#
# Detect SNMP unauthorized usage
#
authentication-trap: on
#
# Send Traps to 13.10.10.1
#
trap-dest: 13.10.10.1
#
# Specify the Set Community Name
#
set-community-name: 1homer2
#
# End of file