HP 500X HP JetDirect Print Servers 600N/400N/500X/300X Administrator's Guide - - Page 119
HP JetDirect Configuration Messages 113, Table 7.3, TCP/IP Configuration Messages 1 of 2
UPC - 088698574287
View all HP 500X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Table 7.3 TCP/IP Configuration Messages (1 of 2) Message TCP STATUS: HOST NAME: CONFIG BY IP ADDRESS: SUBNET MASK: DEF. GATEWAY: SYSLOG SERVER: IDLE TIMEOUT: Description Current TCP status. DISABLED: Indicates that TCP/IP was manually disabled. READY: Indicates the HP JetDirect print server is awaiting data. INITIALIZING: Indicates that the print server is searching for the BOOTP server, or trying to get the configuration file through TFTP. NOT IN USE: Code is in the middle of a download. The host name configured on the print server. It may be truncated. NOT SPECIFIED indicates that no host name was specified in the BOOTP configuration information, or TFTP configuration file (using a "name:" entry). The location from which the print server is obtaining or has obtained its IP configuration information. The options are BOOTP, RARP, default IP, BOOTP/TFTP, DHCP, DHCP/TFTP, or USER SPECIFIED (Telnet, printer's control panel, HP Web JetAdmin, or other). The Internet Protocol (IP) address assigned to the HP JetDirect print server. This is a required entry for operation of the print server. The IP subnet mask configured on the HP JetDirect print server. NOT SPECIFIED is indicated if no subnet mask has been configured, or if the subnet mask is zero. The IP address of the gateway used when sending packets off the local network. Only one default gateway may be configured. Marks the IP address of the syslog server configured on the print server. NOT SPECIFIED indicates no syslog server has been configured, or the syslog server IP address is zero. The timeout value expressed in seconds after which the print server closes an idle TCP print data connection. Acceptable values are integers between 0 and 3600. A value of zero turns off the timeout mechanism. EN HP JetDirect Configuration Page Messages 113