HP 500X HP JetDirect Print Servers 600N/400N/500X/300X Administrator's Guide - - Page 38
public - default ip
UPC - 088698574287
View all HP 500X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Table 3.2 TFTP Configuration File Parameters (2 of 3) contact: ASCII character string that identifies the person who administers or services the printer (SNMP sysContact object). This may include how to contact this person. The default contact is undefined. get-communityname: Specifies a password that determines which SNMP GetRequests the HP JetDirect print server will respond to. This is optional. The community name must be ASCII characters. The maximum length is 32 characters. set-communityname: Specifies a password that determines which SNMP SetRequests (control functions) the HP JetDirect print server will respond to. The community name of an incoming SNMP SetRequest must match the print server's "set community name" for the print server to respond. SetRequests must come from hosts that are configured in the print server's host access list. Community names must be ASCII characters. The maximum length is 32 characters. trap-dest: Enters a host's IP address into the HP JetDirect print server's SNMP trap destination list. If the list is empty, the print server does not send SNMP traps. The list may contain up to four entries. The default SNMP Trap Destination List is empty. To receive SNMP traps, the systems listed on the SNMP trap destination list must have a trap daemon to listen to those traps. trap-community -name: Community name (password) included with SNMP traps that are sent by the HP JetDirect print server to a host computer. The default community name is public. Community names must be ASCII characters. The maximum length is 32 characters. authenticationtrap: Configures the print server to send (on) or not send (off) SNMP authentication traps. Authentication traps indicate that an SNMP request was received, but the community name check failed. The default is "off." Newer HP JetDirect EIO cards will not support the separate SNMP authentification trap setting. (All SNMP traps will be set in the SNMP Trap Destination List.) 32 TCP/IP Configuration EN