HP 500X HP JetDirect Print Servers 600N/400N/500X/300X Administrator's Guide - - Page 29
TCP/IP Configuration, Introduction - jetdirect ip address
UPC - 088698574287
View all HP 500X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
3 TCP/IP Configuration Introduction To operate properly on a TCP/IP network, the HP JetDirect print server must be configured with valid TCP/IP network configuration parameters, such as an IP address. Depending on your printer and system, this can be done in the following ways: Note When shipped from the factory, the HP JetDirect print server has no IP address. If the HP JetDirect print server is not configured with a valid IP address within two minutes after power up, a factory default value of 192.0.0.192 will be automatically assigned. This address must be reconfigured with a valid address for use on your TCP/IP network. For more information on TCP/IP networks, see appendix A. q By downloading the data from a network-based UNIX server using BOOTP (Bootstrap Protocol) and TFTP (Trivial File Transfer Protocol) each time the printer is turned on. Note The BOOTP daemon, bootpd, must be running on a BOOTP server that is accessible by the printer. EN 23