HP 500X HP JetDirect Print Servers 600N/400N/500X/300X Administrator's Guide - - Page 48
If your system uses Network Information Service, HP JetDirect Print Server. - jetdirect change ip address
UPC - 088698574287
View all HP 500X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
7. Edit the /etc/ethers file (/etc/rarpd.conf file in HP-UX 10.20) to add the LAN hardware address/station address (from the configuration page) and the node name for the HP JetDirect print server. For example: 00:60:b0:a8:b0:00 laserjet1 Note If your system uses Network Information Service (NIS), you need to incorporate changes to the NIS host and ethers databases. 8. Turn the printer on. 9. To verify that the card is configured with the correct IP address, use the ping utility. At the prompt, type: ping where is the assigned address from RARP. The default IP address is 192.0.0.192. 10. If ping does not respond, see the chapter "Troubleshooting the HP JetDirect Print Server." 42 TCP/IP Configuration EN
42 TCP/IP Configuration
EN
7.
Edit the
/etc/ethers
file (
/etc/rarpd.conf
file in HP-UX
10.20) to add the LAN hardware address/station address (from
the configuration page) and the node name for the HP
JetDirect
print server. For example:
00:60:b0:a8:b0:00 laserjet1
Note
If your system uses Network Information Service
(NIS), you need to incorporate changes to the NIS
host and ethers databases.
8.
Turn the printer on.
9.
To verify that the card is configured with the correct IP address,
use the ping utility. At the prompt, type:
ping <IP address>
where
<IP address>
is the assigned address from RARP. The
default IP address is 192.0.0.192.
10. If ping does not respond, see the chapter “Troubleshooting the
HP JetDirect Print Server.”