HP 500X HP JetDirect Print Servers 600N/400N/500X/300X Administrator's Guide - - Page 59
Frame, NetWare Source Routing, Table 3.4, Print Server Parameters 1 of 2, JetDirect Internal
UPC - 088698574287
View all HP 500X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Table 3.4 Print Server Parameters (1 of 2) JetDirect Internal Print Server Menu Item CFG NETWORK=NO* IPX/SPX=ON* DLC/LLC=ON* TCP/IP=ON* ETALK=ON* CFG IPX/SPX=NO* Description Selects whether or not you want to access the JetDirect menu items. NO* (default) indicates you do not want to access the menu. You must change this to YES* each time you want to access the JetDirect EIO menu. Identifies whether the protocol stack is enabled or disabled. The default is ON*. Change this to OFF* to disable this protocol. Selects whether you want to access the IPX/SPX menu and set IPX/SPX protocol parameters. In the IPX/SPX menu, you can specify the Frame Type parameter used on your network. s The default is AUTO, to automatically set and limit the frame type to the one detected. s For Ethernet cards, frame type selections include EN_8023, EN_II, EN_8022, EN_SNAP. s For Token Ring cards, frame type selections include TR_8022, TR_SNAP. In the IPX/SPX menu for Token Ring cards, you can also specify NetWare Source Routing parameters, which include SRC RT=AUTO (default), OFF, SINGLE R, or ALL RT. EN TCP/IP Configuration 53