HP 500X HP JetDirect Print Servers 600N/400N/500X/300X Administrator's Guide - - Page 57

Using Telnet to Erase the Existing IP Address, Using the Embedded Web Server - how to reset jetdirect

Get HP 500X - JetDirect Print Server PDF manuals and user guides
UPC - 088698574287
View all HP 500X manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

Using Telnet to Erase the Existing IP Address To erase the IP address during a Telnet session: 1. Type cold-reset, then press [Enter]. 2. Type quit, then press [Enter] to exit Telnet. Note This procedure resets all TCP/IP parameters, but only affects the TCP/IP subsystem. After this has been done the print server should be power cycled. Parameters for other subsystems such as IPX/SPX (Novell NetWare) or AppleTalk are not affected. Using the Embedded Web Server You can set IP parameters on HP JetDirect print servers that support the embedded web server. For more information, refer to Appendix B. EN TCP/IP Configuration 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
EN
TCP/IP Configuration 51
Using Telnet to Erase the Existing IP Address
To erase the IP address during a Telnet session:
1.
Type
cold-reset
, then press
[Enter]
.
2.
Type
quit
, then press
[Enter]
to exit Telnet.
Note
This procedure resets all TCP/IP parameters, but
only affects the TCP/IP subsystem. After this has
been done the print server should be power cycled.
Parameters for other subsystems such as IPX/SPX
(Novell NetWare) or AppleTalk are not affected.
Using the Embedded Web Server
You can set IP parameters on HP JetDirect print servers that
support the embedded web server. For more information, refer to
Appendix B.