HP 500X HP JetDirect Print Servers 600N/400N/500X/300X Administrator's Guide - - Page 35
TFTP Configuration File Entries, Management Protocol or non-default settings, an additional - jetdirect default ip address
UPC - 088698574287
View all HP 500X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Table 3.1 gw Tags in the "bootptab" file (2 of 2) The gateway IP address tag. This address identifies the IP address of the default gateway (router) that the HP JetDirect print server will use for communications with other subnets. sm The subnet mask tag. The subnet mask will be used by the HP JetDirect print server to identify the portions of an IP address that specify the network/subnetwork number and the host address. lg The syslog server's IP address tag. It specifies the server that the HP JetDirect print server sends syslog messages to. T144 A vendor-specific tag that specifies the relative path name of the TFTP configuration file. Maximum length of the path name is 33 characters. The path name must be in double quotes (for example, "pathname"). On HP-UX systems, /usr/tftpdir is prepended to the path. For file format information, refer to "TFTP Configuration File Entries". A colon (:) indicates the end of a field, and a backslash (\) indicates that the entry is continued on the next line. Spaces are not allowed between the characters on a line. Names, such as host names, must begin with a letter and can contain only letters, numbers, periods, or hyphens.The underline character (_) is not allowed. Refer to your system documentation or online help for more information. TFTP Configuration File Entries To provide additional configuration parameters for your HP JetDirect print server, such as SNMP (Simple Network Management Protocol) or non-default settings, an additional configuration file can be downloaded using TFTP. This TFTP configuration file's relative path name is specified in the BOOTP reply using the /etc/bootptab file's T144 vendor-specific tag entry. An example of a TFTP configuration file is provided below (the symbol '#' denotes a remark and is not included in the file). EN TCP/IP Configuration 29