HP 6125XLG R2306-HP 6125XLG Blade Switch Security Configuration Guide - Page 113

Troubleshooting port security Cannot set the port security mode Symptom Cannot set the port security mode for a port. Analysis For a port operating in a port security mode other than noRestriction, you cannot change the port security mode directly by using the port-security port-mode command. Solution 1. Set the port security mode to noRestriction. [Device-Ten-GigabitEthernet1/1/5] undo port-security port-mode 2. Set a new port security mode for the port, for example, autoLearn. [Device-Ten-GigabitEthernet1/1/5] port-security port-mode autolearn Cannot configure secure MAC addresses Symptom Cannot configure secure MAC addresses. Analysis No secure MAC address can be configured on a port operating in a port security mode other than autoLearn. Solution Set the port security mode to autoLearn. [Device-Ten-GigabitEthernet1/1/5] undo port-security port-mode [Device-Ten-GigabitEthernet1/1/5] port-security max-mac-count 64 [Device-Ten-GigabitEthernet1/1/5] port-security port-mode autolearn [Device-Ten-GigabitEthernet1/1/5] port-security mac-address security 1-1-2 vlan 1 104