HP 6125XLG R2306-HP 6125XLG Blade Switch Security Configuration Guide - Page 161
Generate a DSA key pair., Export the DSA host public key to file
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Create the key pair successfully. # Export the DSA host public key to file key.pub. [SwitchA] public-key local export dsa ssh2 key.pub [SwitchA] quit # Transmit the public key file key.pub to the server through FTP or TFTP. (Details not shown.) 2. Configure the Stelnet server: # Generate the RSA key pairs. system-view [SwitchB] public-key local create rsa The range of public key size is (512 ~ 2048) If the key modulus is greater than 512, it will take a few minutes. Press CTRL+C to abort. Input the modulus length [default = 1024]: Generating Keys Create the key pair successfully. # Generate a DSA key pair. [SwitchB] public-key local create dsa The range of public key size is (512 ~ 2048). If the key modulus is greater than 512, it will take a few minutes. Press CTRL+C to abort. Input the modulus length [default = 1024]: Generating Keys Create the key pair successfully. # Enable SSH server function. [SwitchB] ssh server enable # Assign an IP address to VLAN-interface 2. The Stelnet client uses this address as the destination address for SSH connection. [SwitchB] interface vlan-interface 2 [SwitchB-Vlan-interface2] ip address 192.168.1.40 255.255.255.0 [SwitchB-Vlan-interface2] quit # Set the authentication mode for the user interfaces to AAA. [SwitchB] user-interface vty 0 15 [SwitchB-ui-vty0-15] authentication-mode scheme [SwitchB-ui-vty0-15] quit # Import the peer public key from the file key.pub, and name it switchkey. [SwitchB] public-key peer switchkey import sshkey key.pub 152