HP 6125XLG R2306-HP 6125XLG Blade Switch Security Configuration Guide - Page 158
Set the authentication mode for the user interfaces to AAA., Create a local device management user
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
[SwitchB] public-key local create rsa The range of public key size is (512 ~ 2048). If the key modulus is greater than 512, it will take a few minutes. Press CTRL+C to abort. Input the modulus length [default = 1024]: Generating Keys Create the key pair successfully. # Generate a DSA key pair. [SwitchB] public-key local create dsa The range of public key size is (512 ~ 2048). If the key modulus is greater than 512, it will take a few minutes. Press CTRL+C to abort. Input the modulus length [default = 1024]: Generating Keys Create the key pair successfully. # Enable the SSH server function. [SwitchB] ssh server enable # Assign an IP address to VLAN-interface 2. The Stelnet client uses this address as the destination address for SSH connection. [SwitchB] interface vlan-interface 2 [SwitchB-Vlan-interface2] ip address 192.168.1.40 255.255.255.0 [SwitchB-Vlan-interface2] quit # Set the authentication mode for the user interfaces to AAA. [SwitchB] user-interface vty 0 15 [SwitchB-ui-vty0-15] authentication-mode scheme [SwitchB-ui-vty0-15] quit # Create a local device management user client001 with the plaintext password aabbcc, the service type ssh, and the user role network-admin. [SwitchB] local-user client001 class manage [SwitchB-luser-manage-client001] password simple aabbcc [SwitchB-luser-manage-client001] service-type ssh [SwitchB-luser-manage-client001] authorization-attribute user-role network-admin [SwitchB-luser-manage-client001] quit # Create an SSH user client001 with the service type stelnet and the authentication method password. (Optional. If an SSH user is not created, password authentication is used by default.) [SwitchB] ssh user client001 service-type stelnet authentication-type password 2. Establish a connection to the Stelnet server: # Assign an IP address to VLAN-interface 2. system-view [SwitchA] interface vlan-interface 2 149