HP 6125XLG R2306-HP 6125XLG Blade Switch Security Configuration Guide - Page 99

This mode is the combination of the macAddressWithRadius and userLoginSecure modes. It allows one 802.1X authentication user and multiple MAC authentication users to log in. For wired users, the port performs MAC authentication upon receiving non-802.1X frames and performs 802.1X authentication upon receiving 802.1X frames. • macAddressOrUserLoginSecureExt This mode is similar to the macAddressOrUserLoginSecure mode, except that this mode supports multiple 802.1X and MAC authentication users. • macAddressElseUserLoginSecure This mode is the combination of the macAddressWithRadius and userLoginSecure modes, with MAC authentication having a higher priority as the Else keyword implies. It allows one 802.1X authentication user and multiple MAC authentication users to log in. • macAddressElseUserLoginSecureExt This mode is similar to the macAddressElseUserLoginSecure mode except that this mode supports multiple 802.1X and MAC authentication users as the keyword Ext implies. Configuration task list Tasks at a glance Remarks (Required.) Enabling port security N/A (Optional.) Setting port security's limit on the number of secure MAC addresses on a port N/A (Required.) Setting the port security mode N/A (Required.) Configuring port security features: • Configuring NTK • Configuring intrusion protection Configure one or more port security features according to the network requirements. (Optional.) Configuring secure MAC addresses N/A (Optional.) Ignoring authorization information from the server N/A Enabling port security Before you enable port security, disable 802.1X and MAC authentication globally. When port security is enabled, you cannot enable 802.1X or MAC authentication, or change the access control mode or port authorization state. The port security automatically modifies these settings in different security modes. To enable port security: Step 1. Enter system view. 2. Enable port security. Command system-view port-security enable Remarks N/A By default, the port security is disabled. 90