HP 6125XLG R2306-HP 6125XLG Blade Switch Security Configuration Guide - Page 154
for SSH connection.
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
d. Click Save private key to save the private key. A confirmation dialog box appears. e. Click Yes, enter a file name (private.ppk in this example), and click Save. f. Transmit the public key file to the server through FTP or TFTP. (Details not shown.) 2. Configure the Stelnet server: # Generate the RSA key pairs. system-view [Switch] public-key local create rsa The range of public key size is (512 ~ 2048). If the key modulus is greater than 512, it will take a few minutes. Press CTRL+C to abort. Input the modulus length [default = 1024]: Generating Keys Create the key pair successfully. # Generate a DSA key pair. [Switch] public-key local create dsa The range of public key size is (512 ~ 2048). If the key modulus is greater than 512, it will take a few minutes. Press CTRL+C to abort. Input the modulus length [default = 1024]: Generating Keys Create the key pair successfully. # Enable the SSH server function. [Switch] ssh server enable # Assign an IP address to VLAN-interface 2. The Stelnet client uses this address as the destination for SSH connection. [Switch] interface vlan-interface 2 [Switch-Vlan-interface2] ip address 192.168.1.40 255.255.255.0 [Switch-Vlan-interface2] quit # Set the authentication mode for the user interfaces to AAA. [Switch] user-interface vty 0 15 [Switch-ui-vty0-15] authentication-mode scheme [Switch-ui-vty0-15] quit # Import the client's public key from file key.pub and name it switchkey. [Switch] public-key peer switchkey import sshkey key.pub # Create an SSH user client002 with the authentication method publickey, and assign the public key switchkey to the user. [Switch] ssh user client002 service-type stelnet authentication-type publickey assign publickey switchkey 145