HP 6125XLG R2306-HP 6125XLG Blade Switch Security Configuration Guide - Page 150
There are different types of Stelnet client software, such as PuTTY, and OpenSSH. This example
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
# Generate a DSA key pair. [Switch] public-key local create dsa The range of public key size is (512 ~ 2048). If the key modulus is greater than 512, it will take a few minutes. Press CTRL+C to abort. Input the modulus length [default = 1024]: Generating Keys Create the key pair successfully. # Enable the SSH server function. [Switch] ssh server enable # Assign an IP address to VLAN-interface 2. The Stelnet client uses this IP address as the destination for SSH connection. [Switch] interface vlan-interface 2 [Switch-Vlan-interface2] ip address 192.168.1.40 255.255.255.0 [Switch-Vlan-interface2] quit # Set the authentication mode for the user interfaces to AAA. [Switch] user-interface vty 0 15 [Switch-ui-vty0-15] authentication-mode scheme [Switch-ui-vty0-15] quit # Create a local device management user client001 with the plaintext password aabbcc, the service type ssh, and the user role network-admin [Switch] local-user client001 class manage [Switch-luser-manage-client001] password simple aabbcc [Switch-luser-manage-client001] service-type ssh [Switch-luser-manage-client001] authorization-attribute user-role network-admin [Switch-luser-manage-client001] quit # Create an SSH user client001 with the service type stelnet, and the authentication method password. (Optional. If an SSH user is not created, password authentication is used by default.) [Switch] ssh user client001 service-type stelnet authentication-type password 2. Establish a connection to the Stelnet server: There are different types of Stelnet client software, such as PuTTY, and OpenSSH. This example uses an Stelnet client that runs PuTTY version 0.58. To establish a connection to the Stelnet server: a. Launch PuTTY.exe to enter the interface shown in Figure 42. b. In the Host Name (or IP address) field, enter the IP address 192.168.1.40 of the Stelnet server. 141