HP 9040 HP LaserJet 9040mfp/9050mfp - User Guide - Page 149
Resolving control panel messages, Message, Explanation or recommended action - bad duplexer connection
UPC - 829160792927
View all HP 9040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
ENWW Resolving control panel messages Message Explanation or recommended action Access denied MENUS LOCKED Because the control-panel security is active, you cannot open the menus ACTION NOT CURRENTLY AVAILABLE FOR TRAY X TRAY SIZE CANNOT BE ANY SIZE/ANY CUSTOM A duplexed document was requested from a tray that is set to Any Size or Any Custom. Duplexing is not allowed from a tray configured to Any Size or Any Custom. Select another tray or reconfigure the tray. ADF Cover Open Close the ADF cover. Follow the instructions in the on screen dialog box. ADF PAPER JAM A jam has occurred in the ADF. Follow the instructions in the on screen dialog box. ADF PICK ERROR Open the ADF cover Make sure that your original contains no more than 30 pages. Follow the instructions in the on screen dialog box. ADF SKEW ERROR Make sure that the paper guides are aligned on the sides of the originals, and that all of the originals are the same size. Follow the instructions in the on screen dialog box. Authentication information is incorrect. Please re-enter information. A user name or password is incorrect. Type the information again. Authentication Required Authentication has been enabled for this feature or destination. A username and password are required. Contact your network administrator. Authentication required to use this feature A user name and password are required. Contact your network administrator. BAD DUPLEXER CONNECTION The duplex printing accessory is not connected correctly to the MFP. Follow the instructions in the on screen dialog box. BAD OPTIONAL TRAY CONNECTION An optional tray is not connected correctly to the MFP. Follow the instructions in the on screen dialog box. BAD TRAY 1 CONNECTION Tray 1 is not connected correctly to the MFP. Follow the instructions in the on screen dialog box. FULL The specified output bin is full. Empty the bin to continue printing. Understanding MFP messages 145