HP 9040 HP LaserJet 9040mfp/9050mfp - User Guide - Page 56
Device Settings, Letterhead, Preprinted, envelope is greater than190 mm
UPC - 829160792927
View all HP 9040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Type of media Tray Labels, letter, A4-size sheets, or transparencies Tray 1 only Two-sided (duplexed) Media orientation No (Never duplex) Long edge toward feed direction; side to be printed on facing up. Envelopes Tray 1 only No (Never duplex) Short edge toward feed direction; side to be printed on facing up and the postage end toward the MFP. If the height of the envelope is greater than190 mm (7.5 inches), feed the flap-edge first. Otherwise, feed the flap-edge toward rear of the MFP. * When Alternate Letterhead mode is enabled and Letterhead or Preprinted is selected as the media type, you must orient the media for two-sided (duplex) printing. For more information, see Alternate Letterhead mode. Alternate Letterhead mode Windows printer drivers include an Alternate Letterhead mode, which is configured on the Device Settings tab in the MFP properties (in the Windows control panel). This mode causes all print jobs with media types of Letterhead and Preprinted to be treated as two-sided (duplexed), so that you can load paper the same way for one-sided and two-sided (duplex) printing. Because the print speed is the same as it is for two-sided (duplex) printing, one-sided jobs print at approximately half-speed. 52 Chapter 3 Printing ENWW