HP 9040 HP LaserJet 9040mfp/9050mfp - User Guide - Page 66
Setting the registration
UPC - 829160792927
View all HP 9040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Setting the registration Use the Set Registration feature to center the front and back images on a page that has been duplexed (printed on both sides). This feature also allows edge-to-edge printing to be set to within approximately 2 millimeters of all edges of the paper. Image placement will vary slightly for each input tray. The alignment procedure must be performed for each tray. An internal-tray registration page allows the administator to calibrate each tray. To set the registration 1 Touch Menu. 2 Touch Configure Device. 3 Touch Print Quality. 4 Touch Set Registration. You can select a tray by specifying a Source. The default Source is Tray 2. If you want to set the registration for Tray 2, go to step 7. Otherwise, proceed to the next step. 5 Touch Source. 6 Touch a tray. After you touch the tray, the control panel display returns to the Set Registration menu. 7 Touch Print Test Page. 8 Follow the instructions on the printed page. 62 Chapter 3 Printing ENWW