HP 9040 HP LaserJet 9040mfp/9050mfp - User Guide - Page 160
Storage Write, Jetdirect Error
UPC - 829160792927
View all HP 9040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Message Explanation or recommended action 62 NO SYSTEM To continue turn off then on A problem exists with the MFP firmware. To continue, turn off the MFP, and then the MFP on. If this message persists, contact an HP-authorized service or support provider (see the HP support flyer, or go to www.hp.com/support/lj9040mfp or www.hp.com/support/lj9050mfp). 64 ERROR To continue turn off then on A scan buffer error occurred. Turn the MFP off, and then turn the MFP on. If this message persists, contact an HP-authorized service or support provider (see the HP support flyer, or go to www.hp.com/support/lj9040mfp or www.hp.com/support/lj9050mfp). 68.x PERMANENT STORAGE FULL To continue touch OK The MFP NVRAM is full. Some settings saved in the NVRAM might have been reset to the factory defaults. Printing can continue, but some unexpected functions might occur if an error occurred in permanent storage. Touch OK to clear the message. If this message persists, contact an HP-authorized service or support provider (see the HP support flyer, or go to www.hp.com/support/lj9040mfp or www.hp.com/support/lj9050mfp). 68.x PERMANENT STORAGE WRITE FAIL To continue touch OK The MFP NVRAM is failing to write. Printing can continue, but some unexpected functions might occur if an error occurred in permanent storage. Touch OK to clear the message. If this message persists, contact an HP-authorized service or support provider (see the HP support flyer, or go to www.hp.com/support/lj9040mfp or www.hp.com/support/lj9050mfp). 69.xy ERROR To continue turn off then on A temporary printing error occurred. Turn the MFP off, reseat the duplex printing accessory, and then turn the MFP on. If this message persists, remove the duplex unit and resume single-sided printing. If this message continues to persist, contact an HP-authorized service or support provider (see the HP support flyer, or go to www.hp.com/support/ lj9040mfp or www.hp.com/support/lj9050mfp). 79 ERROR To continue turn off then on A critical hardware error occurred. Turn the MFP off, and then turn the MFP on. If the message persists, contact an HP-authorized service or support provider (see the HP support flyer, or go to www.hp.com/support/lj9040mfp or www.hp.com/support/lj9050mfp). 8x.yyyy EIO ERROR The EIO accessory card in slot x has encountered a critical error, as specified by yyyy. 8x.yyyy EMBEDDED The embedded HP Jetdirect print server has encountered a critical error, as JETDIRECT ERROR specified by yyyy. 156 Chapter 10 Problem solving ENWW