HP 9040 HP LaserJet 9040mfp/9050mfp - User Guide - Page 64

Printing on both sides of paper (duplexing) CAUTION Note You can set the MFP to print automatically on both sides of the paper. Never try to print on both sides of labels, envelopes, transparencies, or paper heavier than 199 g/m2 (53 lb). Damage to the MFP or a jam can result. To print on both sides of paper 1 Load (orient) the paper for duplexing. See Orienting media for instructions. For better duplexing performance, set the size and type for Tray 1. 2 Select the Print on both sides option from the program or printer driver. If you cannot select this option from one of those locations, set it at the MFP control panel. (In the Configure Device menu, select the Printing menu, touch Duplex, and select ON.) 3 Set the Binding and Orientation options from the Print dialog box, if possible. Otherwise, set them from the MFP control panel. See Layout options for printing on both sides of paper for more information. Layout options for printing on both sides of paper The four print layout options are shown below. Select the binding and orientation options for the MFP in the Print dialog box, if possible. The terminology in the Print dialog box for the binding edge might be different from the terms that are listed here. If you cannot set these options in the Print dialog box, set them at the control panel. Select the Configure Device menu, select the Printing menu, touch Duplex Binding, and then select the layout option that you want. 1. Long-edge portrait (default) 2. Long-edge landscape 3. Short-edge portrait 4. Short-edge landscape 60 Chapter 3 Printing ENWW