HP 9040 HP LaserJet 9040mfp/9050mfp - User Guide - Page 158
Size In Tray Xx, Tray Xx Size - 50 1 error
UPC - 829160792927
View all HP 9040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Message Explanation or recommended action 30.00.02 SCANNER I/O FAILURE CHECK COPY CONNECT CARD Make sure that the scanner is unlocked. Check the cables. Turn the MFP off, and then turn the MFP on. If this message persists, contact an HP-authorized service or support provider (see the HP support flyer, or go to www.hp.com/support/lj9040mfp or www.hp.com/support/lj9050mfp). 40 EIO x BAD TRANSMISSION To continue touch OK The connection between the MFP and the EIO card in the specified slot has been broken. Touch OK to clear the error message and continue printing. 40 EMBEDDED I/O BAD TRANSMISSION To continue touch OK The connection with the embedded HP Jetdirect print server has been broken. Turn the MFP off, and then turn the MFP on. 41.x ERROR To continue touch OK A temporary printing error occurred. Turn the MFP off, then turn the MFP on. If this message persists, contact an HP-authorized service or support provider (see the HP support flyer, or go to www.hp.com/support/lj9040mfp or www.hp.com/support/lj9050mfp). 41.3 UNEXPECTED SIZE IN TRAY xx To use another tray touch OK A tray (xx) is loaded with media that is longer or shorter in the feed direction than the size configured for the tray. Touch OK to get to TRAY xx SIZE=. Reconfigure the size in a tray so the MFP will use a tray with the size required for the print job. If the error does not clear, turn the MFP off, then turn the MFP on. If this message persists, contact an HP-authorized service or support provider (see the HP support flyer, or go to www.hp.com/support/lj9040mfp or www.hp.com/support/lj9050mfp). 49.xxxxx ERROR To continue turn off then on A critical firmware error has occurred. If this message persists, contact an HP-authorized service or support provider (see the HP support flyer, or go to www.hp.com/support/lj9040mfp or www.hp.com/support/lj9050mfp). 50.x FUSER ERROR A fuser error has occurred. If this message persists, contact an HP-authorized service or support provider (see the HP support flyer, or go to www.hp.com/support/lj9040mfp or www.hp.com/support/lj9050mfp). 51.xy ERROR To continue turn off then on A temporary printing error has occurred. Turn the MFP off, and then turn the MFP on. If this message persists, contact an HP-authorized service or support provider (see the HP support flyer, or go to www.hp.com/support/lj9040mfp or www.hp.com/support/lj9050mfp). 154 Chapter 10 Problem solving ENWW