HP 9040 HP LaserJet 9040mfp/9050mfp - User Guide - Page 151

Message Explanation or recommended action CLOSE FRONT OR LEFT DOOR To continue turn off then on The MFP was turned on with one of these doors open. Close the door, turn the MFP off, and then turn the MFP on. CLOSE RIGHT DOOR Close the vertical transfer door. CLOSE RIGHT DOOR To continue turn off then on The MFP was turned on with the right door open. CLOSE STAPLE DOOR Close the stapler access door on the output paper handling device. Creating... CLEANING PAGE The MFP is generating the cleaning page. DATA RECEIVED The MFP has received data but is waiting for a form feed or has been paused. DIFFERENT PAPER SIZES IN JOB Different media sizes are being used for a single job in the multifunction finisher. Verify that all pages in the job are configured for the same size paper. Deleting... The MFP is deleting a stored job. Digital Send server is not responding Contact administrator The MFP cannot communicate with the server. Verify the network connection. DUPLEXER ERROR REMOVE DUPLEXER Install duplexer with power off The duplexer has been removed. Reinstall the duplexer. EIO X DISK NOT FUNCTIONAL The EIO hard disk is not working correctly. Follow the instructions in the on screen dialog box. E-mail Gateway did not accept the job because the attachment was too large The scanned documents have exceeded the size limit of the e-mail server. Resend the job using a lower resolution, smaller file size setting, or fewer pages. Contact your network administrator to enable sending the scanned documents using multiple e-mails. E-mail Gateway did not respond An e-mail gateway has exceeded the time out value. Verify the e-mail address. ENWW Understanding MFP messages 147