HP 9040 HP LaserJet 9040mfp/9050mfp - User Guide - Page 152
Gateway: <IP, SHOW EVENT LOG
UPC - 829160792927
View all HP 9040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
Message Explanation or recommended action E-mail Gateway rejected the job because of the addressing information. Job failed One or more of the e-mail addresses is incorrect. Send the job again with the correct addresses. Event log empty The user is attempting to view an empty event log by selecting SHOW EVENT LOG from the control panel. FINISHING PROCESS NOT FUNCTIONAL For help touch OK The external device might not be able to perform the finishing process, but the device might still pass paper. The print job will be completed unfinished. FLATBED COVER OPEN The ADF cover is open. Close the cover. Folder list is full. To add a folder, you must first delete a folder. The MFP limits the number of folders that can be established. Delete an unused folder to add a new folder. Found LDAP Gateway: The MFP has located the listed SMTP gateway on the network. Accept the address to enable addressing. Found SMTP Gateway: The MFP has located the listed SMTP gateway on the network. Accept the address to enable addressing. Front Side Optical System Error The scanner has experienced an error. Turn the MFP off, and then turn the MFP on. [FS] DEVICE FAILURE The memory device indicated has failed. Turn the MFP off, and then turn the MFP on. If the error persists, replace the memory device. [FS] FILE A PJL file system command was received, but the command was illogical (for OPERATION FAILED example, a command to download a file to a non-existent directory). [FS] FILE SYSTEM A PJL file system command was received to store something on the file IS FULL system, but the file system is full. [FS] IS WRITE PROTECTED The file system device is protected. No new files can be written to it. [FS] NOT INITIALIZED The file system has not been initialized 148 Chapter 10 Problem solving ENWW