HP Dc5750 WebPAM User Manual - Page 99
RAID 10 - Mirror / Stripe, Data Stripe
UPC - 883585056446
View all HP Dc5750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Chapter 6: Technology Background RAID 10 - Mirror / Stripe Mirror/Stripe combines both of the RAID 0 and RAID 1 logical drive types. It can increase performance by reading and writing data in parallel while protecting data with duplication. At least four disk drives are needed for RAID 10 to be installed. With a four-disk-drive logical drive, one drive pair is mirrored together then striped over a second drive pair. Data Stripe Data Mirror Disk Drives Figure 4. RAID 10 takes a data mirror on one drive pair and stripes it over two drive pairs The data capacity is similar to a RAID 1 logical drive, with half of the total storage capacity dedicated for redundancy. An added plus for using RAID 10 is that, in many situations, such a logical drive offers double fault tolerance. Double fault tolerance may allow your logical drive to continue to operate depending on which two disk drives fail. RAID 10 logical drives on FastTrak consist of 4 disk drives. 93