HP ET115AV HP xw4400 Workstation - Service and Technical Reference Guide - Page 122
Solving, Table 5-6
![]() |
View all HP ET115AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Table 5-5 Diskette problems (continued) Problem Cause Solution Diskette is write-protected. Use another diskette or remove the write protection. Writing to the wrong drive. Verify the drive letter in the path statement. Not enough space is left on the Use another diskette. diskette. Diskette write control is enabled. Use Computer Setup to verify the storage security feature disabled settings. Diskette is damaged. Replace the damaged disk. Cannot format diskette. Invalid media reported. When formatting a disk in MS-DOS, you might need to specify diskette capacity. For example, to format a 1.44MB diskette, enter the following command at the MSDOS prompt: FORMAT A: /F:1440 A problem has occurred with a disk transaction. The directory structure is bad, or there is a problem with a file. In Windows 2000 and Windows XP, right-click Start, click Explore, and select a drive. Select File>Properties>Tools. Under Error-checking, click Check Now. Diskette drive cannot read a diskette. Diskette is not formatted. Format the diskette. You are using the wrong Verify the type of drive that you are using and use the diskette type for the drive type. correct diskette type. You are reading the wrong drive. Verify the drive letter in the path statement. Diskette is damaged. Replace the diskette with a new one. "Invalid system disk" message is displayed. A diskette that does not contain the system files needed to start the workstation has been inserted in the drive. When drive activity stops, remove the diskette and press the Spacebar. The workstation should start up. Diskette error has occurred. Restart the workstation by pressing the power button. Cannot Boot to Diskette. Diskette is not bootable. Replace with a bootable diskette. Diskette boot has been disabled in Computer Setup. Run Computer Setup and enable diskette boot in Storage>Boot Order. Removable media boot has been disabled in Computer Setup. Run Computer Setup and enable Removable Media Boot in Storage>Storage Options. Diskette MBR validation is enabled. Run Computer Setup and disable Diskette MBR Validation in Storage>Storage Options. Solving Table 5-6 Hard drive problems Problem Cause Solution Hard drive error occurs. Hard disk has bad sectors or has failed. Use a utility to locate and block usage of bad sectors. If necessary, reformat the hard disk. Or, run DPS Self-test if the drive is detected by the BIOS. 112 Chapter 5 System diagnostics and troubleshooting ENWW
![](/manual_guide/products/hewlettpackard-xw4400-hp-xw4400-workstation-service-technical-reference-guide-1bc38d3/122.png)