HP ET115AV HP xw4400 Workstation - Service and Technical Reference Guide - Page 86
Removing the PCI Express card, Lower the PCI
![]() |
View all HP ET115AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
If removing another type of PCI Express card, lift the card out of the chassis. You do not need to press in on the "hockey stick" lever. 4. Install a PCI slot cover and close the PCI levers. If the PCI levers do not close, be sure all cards are properly seated and then try again. Figure 4-23 Removing the PCI Express card To install a PCI Express card: 1. Disconnect power from the system (Predisassembly procedures on page 57), remove the side access panel (Side access panel on page 62), and remove the PCI retainer (PCI retainer on page 74), if installed. 2. Lift the PCI levers (1) by first pressing down and then up. 3. Remove the PCI slot cover (2). 4. Lower the PCI (3) card into the chassis. Verify that the keyed components of the card align with the socket. 76 Chapter 4 Removal and replacement procedures ENWW
![](/manual_guide/products/hewlettpackard-xw4400-hp-xw4400-workstation-service-technical-reference-guide-1bc38d3/86.png)