HP ET115AV HP xw4400 Workstation - Service and Technical Reference Guide - Page 82
Required loading order, Gently push outwards on the socket levers.
View all HP ET115AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Required loading order Use the following illustration as a guide for installing memory: ● If installing only one DIMM, install it in socket (1). ● Install the first DIMM pair in sockets (1) and (3). ● Install the second DIMM pair in sockets (2) and (4). Figure 4-18 Required loading order To install a memory module: 1. Disconnect power from the system (Predisassembly procedures on page 57) and remove the side access panel (Side access panel on page 62). 2. Gently push outwards on the socket levers. 3. Lower the DIMM straight down (1) and secure the socket levers (2) into place. 72 Chapter 4 Removal and replacement procedures ENWW
Required loading order
Use the following illustration as a guide for installing memory:
●
If installing only one DIMM, install it in socket
(1)
.
●
Install the first DIMM pair in sockets
(1)
and
(3)
.
●
Install the second DIMM pair in sockets
(2)
and
(4)
.
Figure 4-18
Required loading order
To install a memory module:
1.
Disconnect power from the system (
Predisassembly procedures
on page
57
) and remove the side
access panel (
Side access panel
on page
62
).
2.
Gently push outwards on the socket levers.
3.
Lower the DIMM straight down
(1)
and secure the socket levers
(2)
into place.
72
Chapter 4
Removal and replacement procedures
ENWW